NuTone IK15 and IK25 DoorCom Entry Intercom Systems
Monday, October 21, 2013 at 8:03AM “Know who's at your door before you open it with NuTone's easy-to-install IK25 Surface-mounted DoorCom. It's a melodious 2-note electronic chime. . . with intercom capability!”
Two Inside Speakers provide the security and convenience of answering the door without opening it from two locations. . . plus private intercom between the inside speakers.
NuTone introduced the IK25 DoorCom system in 1975 and it remained in production until 2010.
The IK25 DoorCom was a prepackaged “kit” intercom system. The kit included the 2 inside stations, 1 entry door speaker and a low-voltage transformer, everything you need to install the IK25, except for the wiring.
The 2 inside stations look identical, but they are very different from each other. 1 of the inside stations would be considered the “Master Station”, it contains all of the electronics that enable the system to operate. This Master Station is the hub of the IK25 System and all of the other components of the system wire directly back the this Master Station.
The second inside station is just a decorative plastic grill which contains a speaker cone and 2 push button switches. In a standard installation (without an electric door release), a 5-conductor cable is required between this remote station and the Master Station.
The Entry Door Speaker is a small brown plastic station which includes a Door Chime Push Button and a Name Plate. This IS68 Entry Door Speaker is unique to the IK25 and the IK15 DoorCom Systems. The design feature that make the IS68 different from all other NuTone Door Speakers is that it only requires 2-wires (1 pair) for both the chime operation and voice communication (all other NuTone Intercom Systems require 4-wires (2 pairs) to accomplish these functions.
The final piece of the IK25 Kit is the Model 101NA low-voltage transformer. The 101NA is rated at 16 volts AC @ 10 watts. This is a fairly small, low power transformer, however since the IK25 is an all electronic system, it doesn't require much power to operate.
There were only 2 optional items available for the IK25 system. You could add 1 additional IS68 Entry Door Speaker to the system and there was also an optional Electric Entry Door Release (DR1 or DR2). When the Door Release option was used, it was necessary to add 1 additional push button to each of the inside stations (2 buttons total). The additional inside push buttons were model IM25SW and they matched the standard rectangular buttons on each station.
The Door Release function was already built-in to the IK25, so it was just a matter of adding the extra push buttons and connecting the additional wiring inside the station. It was also necessary to install another pair of wires from the Master Station to the Electric Door Release Mechanism in the entry door frame.
It was recommenced that genuine NuTone Electric Door Releases be used. The DR1 was designed for doors with wooden frames and the DR2 was designed for doors with metal frames. The advantage of using these door releases was that they were matched to the activation circuit inside the IK25. Using another brand or type of door release often would cause the door release circuit inside the IK25 to fail, which was caused by the door release drawing to much current and damaging the IK25.
Operation of the IK25 is very straight-forward. A visitor pushes the Door Chime push button on the IS68 Entry Door Speaker, the IK25 System is activated and the Chime Tones are heard at both of the Inside Stations.
The IK25 System stays active for between 12 and 20 seconds (this is adjustable). If no one answers the door, then the system returns to its “stand-by” state.
To answer the door, the “Door Talk” button is pressed on either of the inside stations, The conversation is controlled entirely by the inside station. Simply push the “Door Talk” button to speak with the visitor and release the button the hear the reply. The speaker will “Time Out” at the preset interval once the conversation has ended.
Using the “Inside Talk” push button allows communication between the 2 inside stations. This is a private conversation and it is not heard through the IS68 Entry Door Speaker.
The Common Problems with NuTone IK25 System:
The biggest problem with the IK25 really has always been its low price. It is probably safe to guess that in the 25 years it was in production, NuTone may have manufactured 250,000 IK25's or more!
The original List Price in 1985 was $94.80 and that price increase to $184.00 by the time it was discontinued. At those price levels no one ever really repaired a IK25. It was very common to replace the IS68 Door Speaker when it failed, however if the Master Inside Station developed a problem a new IK25 Kit would be installed in place of the original system. It was just easier and a better value for the customer this way.
While there are perhaps hundreds of thousands of IK25 systems installed in homes, business and multi-family dwellings there is almost no solid documentation about the equipment itself. There has never been any Service Manual or Electronic Schematic published for the IK25. Even the official NuTone Parts Sheet doesn't list the circuit board in the IK25 as a separate part.
To make things even more complicated, there are probably 6 - 8 different production variations of the IK25 "Master Station".
On these pages, I'll try to shed some light on this simple but mysterious NuTone System.
Reader Comments (8)
I have been trying to obtain a NuTone Model IK25 interior intercom unit (not the master unit, the other one) for the longest time. If necessary, I'll buy the whole kit of 2 interior/1 exterior units, etc. I live in Bay Shore, NY, and my home is presently equipped with a circa 1985 IK25 missing the second interior unit.
Hi Brian,
I will look on Monday to see if I have the speaker you are looking for.
Thanks
Chris
I just purchased a house and it has the IK25 installed. The inside stations does not turn on (no door chime) when push the button from the IS68 Entry Door Speaker. However, the intercom between the inside stations and the entry door speaker is working fine. Is there any switches/config/setting that will enable the door chime? Any helps will be greatly appreciated.
Hi Ken,
The first thing to check is the push button on the entry door station. Remove the door station from the wall and you will find that there are 2 wires coming out of the wall. These wires are connected to 2 brown wires on the back of the door station.
Disconnect the 2 wires from the brown wires and touch the bare ends of the wires together, the chime should ring inside the house. If it does ring, it is likely that the push button on the entry door station needs to be replaced. (we have replacements)
If the chime does not ring, there are 2 likely problems:
1. The main inside station is defective. You can check this by removing the station from the wall, locate where the wires that are coming from the entry door are connected (usually a GREEN and ORANGE wire pair) disconnect the wires that come form the entry door and touch the ORANGE and GREEN wire together. The chime should ring. If it doesn't, the main inside station is defective. If the chime does ring: see #2
2. The last part of the door chime that can be a problem is the pair of wires that run between the entry door and the main inside station. You will need a continuity or ohm meter to check for a break in either wire. If the wire is damaged, it will need to re placed.
Thanks
Chris
Hi,
I need the bottom unit ( brown) to replace the one I have outside. The master ? unit inside the house works fine.
It's the one, brown with push buttom and inside speaker that does not work/..
when someone pushes the button ,I do not hear and chime from the indoor unit.
Can you find me an outdoor unit to help me find-buy one?
Thansl Art
Hi Art,
Based on your description, you have a NuTone IK25 System, the entry door station is a Model IS68. IS68 Door Stations are no longer made and none available
We can create a modern equivalent form the newly made NuTone Entry Door Stations.
Please contact me to find out about ordering one of these.
Thanks
Chris
925-743-8236
Since these newtone units are not available, is there an equivalent product that has the same wire harness interface?
Hi Dan,
Are you trying to replace a IK15 or IK25?
Thanks
Chris