Contact Information
Web Site Search
Intercom Repair Request Form
NuTone IK15 & IK25 DoorCom Systems
Vintage NuTone Intercom Catalogs
Donations
M&S Systems (Music & Sound Intercom)
« Service. . . It's What We Do! | Main | Intercoms, Intercoms, Intercoms! »
Friday
Oct192012

Do you live out of the area and need your NuTone intercom repaired?

Good News! You have come to the right place!

Of course, you will have a little bit of homework to do, but we can help you with that. So, we ask that you contact us first so that we can evaluate your particular system. You can complete our Intercom Repair Request Form, which will give us much needed information regarding your system and the problems that you are experiencing. If on-line forms aren't your thing, you can send us an e-mail or give us a call at (925) 743-8236. Whichever way works best for you is fine, but we are still going to have some questions that you will need to answer.

We repair and refurbish older NuTone intercom systems by replacing all of the damaged, worn and potentially faulty components. We examine boards, and make repairs where necessary. We don't replace one faulty part and send everything back to you. This is a complete refurbishment that should prolong the life of your system. Of course, we can only evaluate, repair and test the equipment that we have in hand. That's why you will have to do some homework and answer some questions.

Keep in mind that not all intercom repair centers are the same. We have been a Factory Authorized NuTone Service Center since 1988 and have over twenty-five years of field service experience going to customer's homes and solving a wide variety of intercom system problems.

Use This Button to Access the Repair Request Form

Reader Comments (3)

These folks did a great job on my intercom repair. It was delivered back good as new and at a fraction of the cost of what a replacement would have been. Thanks!

December 29, 2014 | Unregistered CommenterJack

Thank you very much ! I have an old Nutone IMA-516 intercom amp that stopped working and was unable to find a schematic for it . Saw your YOUTUBE video on the 516 which led me to your web site , which led me to the schematic . Grateful fan in Connecticut .

January 13, 2017 | Unregistered CommenterPeter Veillette

Hi Peter, I'm glad to hear that our Video helped you with your IMA516. I didn't see that you gave the Video a "thumbs-up" or that you subscribed to our YouTuibe Channel, Hmmm - Chris

January 14, 2017 | Registered CommenterCindy & Christopher

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
Post:
 
Some HTML allowed: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <code> <em> <i> <strike> <strong>