Top
Contact Information
Web Site Search
Intercom Repair Request Form
Videos
Navigation
FREE Manuals and Installation Guides
NuTone IK15 & IK25 DoorCom Systems
NuTone Intercom Systems - Service & Repair
NuTone Intercom Problems by Model Number
NuTone Intercom Photo Gallery
Vintage NuTone Intercom Catalogs
Rebuilds & Repairs
NuTone Door Chimes
Donations
M&S Systems (Music & Sound Intercom)

NuTone Intercom Photo Gallery > NuTone Stereo Muisc Intercom Master Station 2500 > NuTone 2500 master station amplifier board

NuTone 2500 master station amplifier board

The red arrows point to the improper radial capacitors that were mounted at some time in the past.  Having the long bare leads on the top of the board is not correct and also the capacitor is not really held in place on the board it self.

The blue arrow ponts to a properly installed axial capacitor, it has short leads and is held tightly against the board bythe soldered leads.

The yellow arrows point to the through holes for this transistor.  The circuit boards in the 2500 had metal sleeves mounted on the through holes for the transistors.  Someone worked on this unit and replaced the transistors.  When they did this, the pulled the sleeves out of the through holes, probably because they didn't have the correct tools to desolder the transistors.  This is vey bad workmanship!